In addition to its main product, diesel generator sets, generators are also professional manufacturers of gas generator sets. Although many people have heard of gas power generation, they are still not very familiar with how to generate electricity. Let me introduce the working principle of gas generator sets to you.

燃气发电机组与汽油发电机组，柴油发电机组相比降低了对环境的污染，是一种型的发电机。而且燃气发电机组结构简单，使用可靠，输出的电压和频率稳定。

Compared with gasoline and diesel generators, gas generator sets reduce environmental pollution and are an environmentally friendly and energy-saving type of generator. Moreover, the gas generator unit has a simple structure, safe and reliable use, and stable output voltage and frequency.

燃气发电机组包含：发动机发电机控制器，还有可选用装置稳压过滤装置气液分离装置等，发动机与发电机同轴连接，并置于整机底盘上，再将消声器和调速器连接在发动机上，由燃气源通燃气发电机组入发动机内的燃气通道，连接在发动机上带拉绳的反冲起动器以及连接在发电机输出端的电压调节器。其中燃气源内置放的可燃气体是天然气，或液化石油气，或沼气。

The gas generator set includes: an engine generator controller, as well as optional devices such as a pressure stabilizing and filtering device, a gas-liquid separation device, etc. The engine is coaxial with the generator and placed on the chassis of the entire machine. Then, the muffler and governor are connected to the engine, and the gas source is connected to the gas channel of the gas generator set inside the engine, A recoil starter with a pull rope connected to the engine and a voltage regulator connected to the output end of the generator. The combustible gas stored in the gas source is natural gas, liquefied petroleum gas, or biogas.

燃气发电机组过滤装置用于保护燃气管路的阀门，过滤网的孔径应不大于1.5MM。

The filtering device of the gas generator set is used to protect the valve of the gas pipeline, and the aperture of the filter screen should not be greater than 1.5MM.

燃气稳压过滤装置是燃气发电机组燃气输配过程的主要和关键设备，主要承担调压和稳压的功能，同时还要承担过滤计量加臭气体分配等一项或多项功能。燃气发电机组燃气稳压阀出口气压的波动在整个燃烧调节范围內应不超过

The gas pressure stabilizing and filtering device is the main and key equipment in the gas transmission and distribution process of gas generator units, mainly responsible for regulating and stabilizing the pressure, as well as filtering, measuring, and distributing odorized gas. The fluctuation of gas pressure at the outlet of the gas regulator valve of a gas generator set should not exceed the entire combustion regulation range

燃气发电机组保养工作应按规定的日保养周保养月保养要求进行，这样才能延长燃气发电机组的使用寿命，减少机组故障的出现。下面我们就来看一下燃气发电机组的维护保养。

The maintenance work of gas generator units should be carried out according to the prescribed daily, weekly, and monthly maintenance requirements, in order to extend the service life of gas generator units and reduce the occurrence of unit failures. Let's take a look at the maintenance and upkeep of gas generator sets.

1润滑系统的保养。该种类型机组由于存在运转部件多,运转部件工作条件恶劣,大多处在高温高冲击载荷状态下,需要润滑的部位较多,对润滑系统的可靠性要求较为苛刻,因此要注意检查润滑油系统的油质情况油位情况油温和油压情况,注意离心滤清器和机油滤清器的清洗,避免出现因润滑不良造成的机组零部件磨损加剧,缩短机组零部件的使用寿命,加大维护工作量

1. Maintenance of the lubrication system. This type of unit has many operating components and poor working conditions, most of which are in high temperature and high impact load conditions. There are many parts that need lubrication, and the reliability requirements of the lubrication system are relatively strict. Therefore, it is necessary to pay attention to checking the oil quality, oil level, oil temperature, and oil pressure of the lubricating oil system, and pay attention to cleaning the centrifugal filter and oil filter to avoid exacerbating the wear of unit components caused by poor lubrication, Shorten the service life of unit components and increase maintenance workload

空气过滤器的保养。空气过滤器天然气发电机组如果运转良好的话,将有效地避免因进气阻力大引起的增压压力下降过大,进而造成涡轮增压器出现漏油现象;还可避免因流量减少引起的涡轮增压器压气机喘振现象。因此要定期清理空气过滤器,必要时更换新滤芯。在潮湿地区可将纸质滤芯抽掉

Maintenance of air filters. If the natural gas generator set with air filter operates well, it will effectively avoid excessive pressure drop caused by high intake resistance, which will cause oil leakage in the turbocharger; It can also avoid turbocharger compressor surge caused by flow reduction. Therefore, it is necessary to regularly clean the air filter and replace it with a new filter element if necessary. Paper filter cartridges can be removed in damp areas

相关间隙和角度的检查和调整。主要是火花塞间隙气门间隙和配气定时等的检查和调整。

Inspection and adjustment of relevant clearances and angles. Mainly for inspection and adjustment of spark plug clearance, valve clearance, and valve timing.

通过这些规定的保养,能及时发现机组是否存在声音异常动作异常外观异常温度异常压力异常和气味异常等故障现象,从而及时对机组进行检查和调整,进而有针对性的加以,确保机组运行在佳状态。

Through these prescribed maintenance measures, it is possible to promptly detect any abnormal sound, movement, appearance, temperature, pressure, or odor issues with the unit. This will enable timely inspection and adjustment of the unit, and targeted solutions to ensure that it operates in good condition.